Hi, anyone have any suggestions as to what could be wrong. We have done the following:
Replaced the sparkplug
added fuel stabelizer
checked all connections
Shortly after replacing the sparkplug - it started firing but would not turn over, we found leaves in the air intake and cleaned that out, found a loose connection (not sure what it was for) and suddenly it fired up and ran like a champ around the block 3 times...and was running very well, then died again and now will not fire at all.
Replaced the sparkplug
added fuel stabelizer
checked all connections
Shortly after replacing the sparkplug - it started firing but would not turn over, we found leaves in the air intake and cleaned that out, found a loose connection (not sure what it was for) and suddenly it fired up and ran like a champ around the block 3 times...and was running very well, then died again and now will not fire at all.
Comment