G1 Solenoid or wiring issue

Collapse

Forum Announcement

Collapse
No announcement yet.
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • G1 Solenoid or wiring issue

    I have had my starter/generator repaired and replaced one bad solenoid with a replacement aftermarket solenoid. My problem;
    After I hook everythng up, when I place the battery negative cable on everything is energized. The key is turned off but the starter /generator cranks at full speed. The unit does not start, I assume because the key is still off an the gas pedal is not depressed. Looking for some direction. I replaced all the wiring exactly like I removed it. Or so I think! Thanks for any info anyone can provide.

  • #2
    Hello, either it is a wiring issue, or your solenoid is stuck open. Here's a wiring diagram for you to go over your connections, please trace your wires carefully http://www.golfcartsforum.com/golf-c...g-diagram.html
    Regards

    Comment


    • #3
      Thanks Matti,

      I wired it wrong. I guess it helps when you read the directions carefully. the aftermarket solenoid has a little paper inside that says it needs to be wired with both open ends together, which looks backwards as it sits on the cart.

      Comment


      • #4
        Posted earlier by crazyned
        Thanks Matti,

        I wired it wrong. I guess it helps when you read the directions carefully. the aftermarket solenoid has a little paper inside that says it needs to be wired with both open ends together, which looks backwards as it sits on the cart.
        Great, glad you got it all fixed up
        Regards

        Comment

        Show More Comments

        Unconfigured Ad Widget

        Collapse

        Unconfigured Ad Widget

        Collapse
        Loading
        X