Need Help Ez-go Wont Go

[ruw]

HEY I'm having a problem like Mik was having except not from pulling a car. My oldest was pushing his son in his 12volt toy truck up the drive like he's done 100 times before, except this time the cart just stopped dead. I have check the batts, switch, f/r. They all are working. My Curtis controler only has 3 lugs A1 B+ B- PN73326G02 SN9193-POO3287. I checked A1 to B- and had 35+volts with the accel pressed. Does this mean controlers good? What should I check next?

[andy4639]

Check the cables good. Give them all a good tug. If they are all tight look at the solenoid.

[ruw]

thr solenoid is clicking and has voltage to both sides, also jump it out STILL NOTHING

[Mick]

corection it was a 1 1/2 ton truck and it pulled it untill i got to the hill lol.chk connections at motor thats where the dirt gets most