I need help with 36v ez go

[goofey chuck]

I have a Model X440-23. That won't move. The batteries are good. It doesn't even make a noise when I push on the peddle.

[dougmcp]

Welcome Chuck, I moved your post to the Ezgo section.
Check your battery pack voltage, should be around 38v.
Check your battery connections for clean and tight.
Do you get a back up beep with ignition on and in reverse?
If not check the reed switch and ignition switch.
If yes, check the solenoid by jumping the large posts with a 6ga wire.

[Michael Eddie]

Welcome to the forums Chuck, I agree with what Doug is saying to test, try it and let us know what happens.

[dougmcp]

Hey Chuck, any progress on the troubleshooting?