Hi, My name is Billy Potter, I'm new here. I have a 2018 Club Car Precedent that is not getting a signal to, or, from the throttle pedal sensor. I have I.D.E. Syndrome now, (I've Done Everything) to try to figure this thing out. Does anyone know the sequence of events for this switch, or how it works? How to bypass, or hot wire this switch? I don't want to buy a new pedal group, and then find out it was just a wire or something else
2018 Precedent throttle switch question
Collapse
Forum Announcement
Collapse
No announcement yet.
X
-
Here is the TPS test procedure, if you run into any questions feel free to ask!
Photos Attached
You do not have permission to view this gallery.
If you are a guest, you may be required to Log In or Sign Up to view.
This gallery has 1 photos.
Comment
-
Thanks, I've already done those test, I can't get any response from the pedal. My question was, How to bypass that switch? I should be able to use a toggle switch, or a momentary switch, or both, to duplicate the signal from the original switch. Knowing the sequence of events, or, what wires connect or disconnect as you push the throttle, would be the needed info.
Comment
-
Posted earlier by hogwildmcThanks, I've already done those test, I can't get any response from the pedal. My question was, How to bypass that switch? I should be able to use a toggle switch, or a momentary switch, or both, to duplicate the signal from the original switch. Knowing the sequence of events, or, what wires connect or disconnect as you push the throttle, would be the needed info.
Comment
Recent posts in current forum
Collapse
Unconfigured Ad Widget
Collapse
Unconfigured Ad Widget
Collapse
Comment