Tweet
1990 club car DS (stripoed to the frame)
Changed to a Navitas 440 with wiring harness solenoid and new motor
there wire harness has 5 wires for the PB6 (Green, Blue, Yellow, Purple and White)
The PB6 has Red and Black wires and 3 spade micro switch
From my findings the Green wire to the outside spade and the Blue wire to the inside spade leaving the mide spade free.
Now the question is of the Red and Black wire from the PB6 what does the Red wire connect to (Yellow, Purple, or White) and the same for the Black wire (Yellow, Purple, or White)
Thanks for your help in advance
Carl
Changed to a Navitas 440 with wiring harness solenoid and new motor
there wire harness has 5 wires for the PB6 (Green, Blue, Yellow, Purple and White)
The PB6 has Red and Black wires and 3 spade micro switch
From my findings the Green wire to the outside spade and the Blue wire to the inside spade leaving the mide spade free.
Now the question is of the Red and Black wire from the PB6 what does the Red wire connect to (Yellow, Purple, or White) and the same for the Black wire (Yellow, Purple, or White)
Thanks for your help in advance
Carl
