Club/ball washer

[RGerhardt]

Hello, new guy here. Just picked up a 2019 Tempo and looking for an original club/ball washer (part number) that slides into the mount. I have 2 coolers mounted and need only 1. Thank you

[golfcartg]

102538803 for the original, here’s a pic of the mount for reference

[RGerhardt]

Thank you, I’ve seen that one. The one I thought I needed just slides down into the bracket.

[golfcartg]

Thank you, I’ve seen that one. The one I thought I needed just slides down into the bracket.

The original ball washer utilizes a different mounting bracket to avoid being pulled up and out during the ball washing procedure, a scenario the engineers thought might happen if the V-shaped cooler bracket were employed

[RGerhardt]

The original ball washer utilizes a different mounting bracket to avoid being pulled up and out during the ball washing procedure, a scenario the engineers thought might happen if the V-shaped cooler bracket were employed

Any idea where I can find one that mates with the V bracket?

[golfcartg]

No such thing I’m afraid, the only option they had that fits into the cooler slot was the sand bucket. You could consider reaching out to a 3D printer to have a custom bracket made using the cooler dimensions if your application requires a universal option. Otherwise it would be easier to remove what’s there and swap it for the oem ball washer bracket and maybe cover the existing screw holes with some clear silicone wiped flush.