Tweet
i got a 2010 president, was brought to me to fix- no solenoid clicking. would not even power up my scanner. oh yea it's an IQ. changed controller, now scanner power's up. giving me HPD fault, throttle is at 42% with pedal up . plugged up new MCORE, went to 45%. thought the solenoid might be stuck open, replaced it. cleared faults, the cart runs.... until switch from forward to reverse, then throws the HPD again. checked over everything i could, while watching the scanner screen unplug speed sensor automatically went from HPD to no faults. plug it back up and the carts runs till you let up on the pedal & solenoid drops out, then the HPD is back. replaced the speed switch, another new controler to. anyone have any idea's ?
-
-
what is the serial number
check out the troubleshooting chart and see if anything is missing
-
Ph1022-101900Comment
-
Thats what I thought its not an IQ its an excel and it is the adapter that connects to the MCOR now you have the wrong controller in there I could not make my Ph run at all with and IQ controller your better than me
excel is a grey controller 1515-xxxx
IQ is a black controller 1510-xxxxUpdated by gaminde; March 15, 2014, 10:25 PM.Comment
-
yea your right, the original one was grey, the 1 i put on was grey i believe & was rebuilt by flight systems. but i know the second one was black. i'll get another grey one tomorrow. thank you brother. saved me allot of grief.Comment
Comment