when I plug in my charger, the charger hums for a few seconds and then trips the breaker on the charger. Any suggestions on what the problem may be?
Won't charge
Collapse
Forum Announcement
Collapse
No announcement yet.
X
-
Your going to need a hydrometer from the auto parts store, you suck up a small amount of acid from each cell and there is a float inside that you read a number off of its called specific gravity.
but most likely it going to be diodes inside of the charger either a 2" square thing about 1/2 inch thick with 4 wires or a strip of aluminum with 3 wires going to it.
do a google search for checking diodes depending on what you have.
Comment
-
ok, I used a different charger and The needle pegged all the way over on the high side and then if popped the breaker after about 3 or 4 minutes. On my charger the needle stays all the way at the bottom and it pops the breaker after about 10 seconds. Any ideas on what I should look for now?
Comment
Recent posts in current forum
Collapse
Unconfigured Ad Widget
Collapse
Unconfigured Ad Widget
Collapse
Comment