1st build have wiring questions

Collapse

Forum Announcement

Collapse
No announcement yet.
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1st build have wiring questions

    I have 2 gauge battery cables,controller cables. Now i am wondering what gauge wire should I replace all of the other tiny subpart wiring with 14 gauge.Any suggestions would be greatly appreciated. Will post pics soon since I have lifted it tires,steering column,steering wheel,dash,stereo, too much to list thanks,Kenny.

  • #2
    Just upgrade with new wire that doesn't have any breaks in it of same guage. It will be fine it doesn't carry the load of the drive system.

    Comment


    • #3
      How can I get a 2011 wiring diagram?

      Comment


      • #4
        If you have a home depot in your area they have a low voltage wire in numinous colors in #16 that should work perfect. it sells in 24 ft packs.

        Comment


        • #5
          Thank you guys I have everything at my disposal a very large area my new problem is that the previous owner has the wires spliced into least once or twice

          Comment


          • #6
            I was also told to run 6 gauge to my forward and reverse switch does that sound correct

            Comment


            • #7
              What type of cart IQ or series ?
              IQ only has a toggle switch and #16 is fine
              if its a series cart with a big mechanical switch then the same size as battery cables

              Comment


              • #8
                No just a little toggle switch thankyou guys are a great help

                Comment


                • #9
                  See if this helps.

                  Comment


                  • #10
                    Should I worry about all the splices.I put new ends on them and heat taped them Once again thanks soooooo much for the help

                    Comment


                    • #11
                      Does anyone know where to find any of the square controller pins for club car no luck with dealer or radio shack

                      Comment


                      • #12
                        Posted earlier by bailey264
                        Does anyone know where to find any of the square controller pins for club car no luck with dealer or radio shack
                        Guess I could add this to my parts list
                        Jameco 44476-3112

                        Comment

                        Show More Comments

                        Unconfigured Ad Widget

                        Collapse

                        Unconfigured Ad Widget

                        Collapse
                        Loading
                        X