Light kit wiring

[Dlperezjr58]

I have a 2012 club car president that I am adding a light kit too. The head light has a 48 to 12 volt converter. The bucket harness has a 12 pin connector . This does not match the harness from the headlight. Light has a 6 pin connector with a adapter to connect to the converter. Headlight does work but im unable to connect the tail lights.

[cybercart]

Hey here’s the pin layout for the 12 pin connector if this helps

[Dlperezjr58]

Hey here’s the pin layout for the 12 pin connector if this helps

Thanks. I was hoping there was a adapter cable I could use.

[cybercart]

Thanks. I was hoping there was an adapter cable I could use.

So in 2008.5 cc stopped including the bucket harness on their precedents, and the tail lights need a timer relay wired n so you can continue to use the parking brake without the lights being on all the time. Do you have any specifics on the light kit brand / links / pics you can provide?

[Dlperezjr58]

So in 2008.5 cc stopped including the bucket harness on their precedents, and the tail lights need a timer relay wired n so you can continue to use the parking brake without the lights being on all the time. Do you have any specifics on the light kit brand / links / pics you can provide?

10LoL tail lights and bucket harness. Gaoerfu-cp 12 volt club car headlight. Drive up 48volt to 12 volt step-down voltage converter. Sry no pictures right now.

[cybercart]

Unless you buy a complete kit you may be forced to perform some splicing, I am attaching a guide with all the basic installation info, if you are wiring in a 48 to 12 reducer, that would need to be wired directly to the batteries

[Dlperezjr58]

Unless you buy a complete kit you may be forced to perform some splicing, I am attaching a guide with all the basic installation info, if you are wiring in a 48 to 12 reducer, that would need to be wired directly to the batteries

It looks like I need a gtw front harness . That would allow me to make my connection.

[Dlperezjr58]

It looks like I need a gtw front harness . That would allow me to make my connection.

Thank you for the help. I will let you know if it works when I can find a harness.